Pages

Monday, June 17, 2013

Wire Wrapping Jewelry



Wire Wrapping Jewelry


The Art of Wire Wrapping Jewelry

I’ve seen recurring trends throughout the last eight years that I’ve been hand crafting beaded and wire jewelry. One most prevalent design trend that I’ve noticed is the jewelry design technique of wire wrapping. Wire wrapping is a jewelry design technique commonly used in pendant necklaces, and a great example of the technique is the popular “Tree of Life” pendant with its wire strands wrapped to form a tree with several bead embellished branches. The basic purpose of wire wrapping enables cut cabochons, gemstone nuggets, cameos, coins, and beads to be used as pendants adding a focal embellishment to a chain or a strand of beads. The wire wrapping technique is also popular in creating other jewelry pieces such as bracelets and rings as well.

If you are contemplating a wire wrapping jewelry project and it’s your first attempt, don’t get discouraged if it doesn’t turn out as you envisioned at first, just keep trying and soon you will find that like many other things wire wrapping jewelry will get easier with practice and you’ll be an expert in a short amount of time. And if you’ve ever made wrapped loops for your dangle earrings or bead charms then you’ve taken the first step and you know that your wrap must fit snuggly around the frame and sit directly next to the previous wrap for the best looking wrap.
Many of today’s handmade wire jewelry designers are using almost every wire style available in their wire wrapping jewelry projects. Flat wire with stamped patterns add a dazzling uniqueness to a wrapped cabochon or crystal pendant and look especially nice as the center wire in the frame of the cabochon and as the primary frame wire around the crystal. Some wire wrapped jewelry artists utilize the same gauge wire throughout the entire design while others utilize a smaller gauge frame such as a 16, 18 or 20 gauge wire and higher gauge wrap like 22 or 24 gauge wire which adds a dimensional character to the piece but also allows the use of smaller bead embellishments.

When wrapping a cabochon stone, you’ll typically be using three wires as the base of the cab frame and one wire as the wrap wire tying the frame together. The two outer wires typically called the first and second primary frame wires for your wire wrapping project will be of round, twisted, or square shaped wire stock and should be of half hard tensile strength for sturdy support of your chosen pendant piece. The third or secondary center frame wire is where you can add a decorative stamped wire if you desire but remember that this wire should be the same thickness as the outer frame wires.

Common wire styles used as the wrap wire are round and half round wire stock and of a soft or dead soft tensile strength. Soft and dead soft wires are the easiest to manipulate in order to wrap snuggly around your pendant frame. As the wrap wires function is to tie the frame wires together these must be wrapped tightly around your frame. A good practice to get your-self into when creating a wire wrapped jewelry piece is to tighten the wrap every two or three turns. To do this you will need your flat or chain nose pliers, place the jaws of the pliers on the wrap wire parallel to the flat surface of the frame, clamp down slightly and give the wires a twist in the same direction of your wrap. If you’re wrapping a single frame wire that is round I find it easier to tighten my wrap using my crimping pliers but again if I’m using square wire I’ll use my flat nose pliers to tighten the wrap around my frame wire.

I recently designed and created a pair of 22 gauge sterling and copper drop ear wires embellished with facet cut Citrine rondeles and Peridot heishe natural gemstones. I used 22gauge square half hard sterling to hand form the single piece ear wire drop and gave them a slight convex curve so the bottom of the ear wire faced the back of the head. And although 22gauge is thin I filed the corners of the square wire round towards the bottom end and used a reamer to enlarge the stringing hole in my natural gemstone beads so that they would easily slip over the sterling wire. To finish the drop style earrings I wrapped 22gauge round copper wire loosely around the gemstones in an orbital pattern tightly wrapping each end of the copper wire around the sterling wire above and below the gemstone beads.

The last tight wrap was a learning experience for me as my copper wire wanted to tighten snugly around the gemstones, this is not what I wanted. I wanted an airy free motion orbital effect in the overall design I found the best way to achieve the space was to slide a spacer object between the beads and copper wrap wire as I was tightening that last wrap. The copper wrapped sterling ear wires turned out to be beautiful and sunlight shines radiantly through the yellow gold of the facet cut Citrine gemstone orbs.

Local Wire Wrapping Jewelry Artists

One local wire wrapping jewelry expert Bobbi Maw of My Wired Imagination a friend and fellow wire jewelry designer teaches classes on Tuesday mornings at Button’s Baubles and Beads my favorite bead and silver wire supply shop. I’ve known Bobbi for almost 2 years and as a talented jewelry artist she’s the one I turn to when I have design questions, she’s always there to help me figure out a connection or a gemstone choice. What I enjoy about her wire wrapped jewelry designs is Bobbi’s skilled use of the gorgeous Swarovski crystals which add a high end sparkling brilliance of luxury gemstones.

There’s another local wire wrapping jewelry artist that I admire for her coil and weaving work in the copper wrapped designs she creates. I enjoy looking at Edi Scheafers copper wire wrapped designs, her wraps are tightly nested next to each other and her coils are nicely spaced.  I respect the advice of these two very talented wire wrapping jewelry artists, they have taught me the importance of making sure my wraps are tight.

Did you enjoy this article, to read more about wire jewelry click here

Wednesday, June 12, 2013

Wire Sculpture



Wire Sculpture

Wire Sculpture


Wire Jewelry is Wire Sculpture

Creating wire jewelry is undeniably the art of wire sculpture. While it is true that a structural building and typical clay sculpture are in their own rights masterfully created on a much larger scale the art of wire jewelry design employs the same sculptural art principles. As an architectural drafter I believe that the drafting phase of a sculptured wire design is the most important deciding factor in relating the proper scale of the completed piece for the proportion of the sculptural elements you plan to use in your design. And I also believe it doesn’t matter how sophisticated your abilities may be, if you sketch your design on paper or use a computer program when building your vision layer by layer, ultimately the drafting or sketching phase is where you will see every aspect of your design start to fit together perfectly.

Personally I love to sketch my sculptured wire jewelry designs by hand, I think of it as my brainstorm process and quite often it’s where I receive a heightened influx of inspiration and find myself sketching two or three versions of the “master” design. I find inspiration can come from anywhere the colors that pop out at me as I flip through a fashion magazine for current trends, an emotion outwardly expressed on a passing face as I walk down the street, a thought provoking phrase, a childhood memory that comes to mind out of the blue. While not all of the wire sculptured jewelry I create has an inspirational beginning, all will eventually provoke a memory, an emotion, or a visionary dream within the mind of a potential customer.

Let’s look at wire sculpture from a different perspective, the perspective of the emotional bond between the artist and the sculpture, the sculpture and the gallery, and the sculpture and the potential customer. Looking at this from the potential customer’s point of view, what do you see when you look at a sculptured figure created in clay on display at the art gallery? Would you think to look beyond the manipulated clay surface to wonder if the figure is a solid mass or understand that the clay may actually rest on a crudely sculpted wire frame? Do you notice how the artist’s manipulated clay image makes you feel, the emotions it provokes when you stand back to admire it? Do you see each passionate stroke the artist made with his or her bare hands to manipulate and form the lump of potter’s clay into the image their emotions express?  

And what do you notice about a skyscraper with its penetrating architectural form impressing itself against the downtown silhouette? Like the clay sculpted figure, most of us would probably take notice of the outer shell with its gleaming glass walls rising up to the clouds before we acknowledge the internal structure, the wire sculpture web of steel beams. To the architectural designer his steel and glass structure like the clay sculpture is much more than the components that comprise the image we see it is the artistic expression of the inspiration acquired by delving into the personality which the customer’s brand exudes.

Wearable Wire Sculpture

We now can better understand the justified relevance of wire jewelry design as an art form and not just a craft to the professional jewelry designer.

Did you enjoy reading this article, see more wire sculpture articles here: http://designingwsimplicity.blogspot.com/2012/12/for-love-of-handmade.html

Tuesday, March 26, 2013

A Project for the Cause

Last week I visited England Brothers Park here in Pinellas Park which hosts the local Country in the Park event every Spring. It was a beautiful day for the event, clear sunny skies, a light breeze and plenty of activities and booths to visit. There were booths for community services passing out free gifts and information, food vendors to fill our bellies, rides for the kiddies and craft vendors selling their handmade items.

I was on a fact finding mission to meet local merchants and get information about the local Art Society and opportunities that might be out there I as a handmade jewelry designer could take advantage of. One of the booths I visited was for our local American Cancer Society office here in Pinellas Park and I had the chance to meet Sue one of the directors. I introduced myself and let her know that I am a local handmade jewelry designer interested in donating to their cause. We spoke for a few minutes and I let her know that the American Cancer Society's Relay for Life is a cause that I am familiar with and  have in the past donated one of my designs, a Red Coral and Hematite gemstone necklace to the events auction in Trinity, Florida and would be interested in continuing to donate a design for their annual auction. Sue was happy to see a local designer willing to donate for the cause and accepted my offer, she gave me her business card and told me to call her when I had decided on an item to donate.
Flat Drawn Cable Charm Bracelet

Rolled Cable Charm Bracelet

Well, over the last week I have been thinking about what I wanted to donate. Whether I would give an existing jewelry piece or create a new item especially for this cause and just the other day I finally decided I would create a cause specific design. I've been creating copper charm bracelets for a few months and thought it would be a wonderful idea to create one especially for the Relay for Life Campaign with its purple and red colors, but I'm adding a special twist to my original drawn cable chain design. I've not created a charm bracelet with twisted wire yet and I though this would be the perfect time to add this feature as well as ending it with a hand crafted toggle clasp as well. I've gotten started on creating the special piece by hand twisting the 22guage copper wire myself,
Hand twisting 22guage copper wire
Whenever possible I like to use findings I can create myself like ear wires, ball pins, jump rings and hoop earring forms. I could have purchased this twisted wire material already made but I like to use handmade elements in my designs that I can make myself I feel it adds handmade authenticity to the Simply Katie's SK Wire Jewelry brand of handmade beaded gemstone & wire jewelry. All the copper charm bracelets I've made so far are created entirely by hand with the exception of the toggles, charms & beads but if I'm successful with creating a toggle for this project I'll add these to my findings supplies as well.
Open Handmade Jump Rings

Soldered Handmade Jump Rings
2013 ACS Relay for Life Bracelet in Progress
Sometimes things happen when you're working on a project, I just happen to find that I did not twist enough wire to create enough rings to complete a 7 inch length of chain. Back to the spool I went and cut another 4 foot length of wire to twist which when I was done with the twisting yielded me approximately 20 1/2 inches of additional wire and that's more than enough tho complete the chain portion of the project. I'll create the toggle with hand twisted 20guage or untwisted 12guage round copper wire for strength and use 22guage handmade copper ball pins to add purple and red beads with small white pearls to accent them and finish the piece with a "Life" word charm also of twisted copper wire. When it's finally done I'll give my hands a few days rest (haha), twisting wire by hand is not an easy task but in the end it's a project I'm proud of.

I'm enjoying creating this special Relay for Life Campaign charm bracelet for the American Cancer Society. It's been a special cause for me for a long time as is Hospice because of my mother who started me beading and is the inspiration for Simply Katie's SK Wire Jewelry. My mother fought cancer twice in her life and finally lost her struggle in the Summer of 2011, God rest her soul. I know it's for a great cause and Sue will have a smile on her face when she come's to pick up the completed "Life" bracelet.

Thursday, February 28, 2013

The Slipping Toggle



My consignment shop owner friend Debbie gave me some customer feedback on one of my necklace designs I had placed with her. She said there was a good measure of interest in the African Turquoise Pendant necklace and several potential customers had tried it on, you know to see how it looked and felt as they were deciding if to just say yes and make the final purchase. I don’t know about you but that’s when I get most excited, I love to hear talk about my jewelry designs that people like them, are commenting on them and trying them on wanting to purchase. That kind of talk fills me with hope and confidence it gets me believing that it’s only a matter of time before my designs are “in demand”. It won’t happen overnight that I’m sure of but as I keep working on my design skills and improving on learned techniques, each new piece of jewelry SK designs will become better more creative, more uniquely beautiful and lusted after by Simply Katie’s SK Wire Jewelry followers. 

With the good news also came some bad news and honestly I don’t know that I would go so far as to classify it as “bad news” except that these potentials customers ended up not making the purchase. In business (and in life) everything has a positive and negative, the negative here is that they did not purchase my necklace and the reason was – and here’s the positive – because there was a design problem with the toggle, it would not remain latched my handmade wire wrapped toggle bar slipped out of the ring every time the customer turned her head. Remaining positive and being an always deep in thought [overly] analytical woman I thought Okay, what exactly is the cause of this issue and took the necklace with me to try and solve the problem. Well it just so happens that one of my favorite bead and wire supply shops and where I bought the toggle ring, Buttons Baubles & Beads is on the next block so I walked over to see if my friend Bobbi Maw was in and could give me some insight, you know a second set of design eyes and plus she’s got a Wired Imagination. Bobbi’s given me many tips before and this again was a positively fruitful experience, she showed me how to create tighter wraps so off to my studio I went hoping that tightening the wraps on the toggle bar would be the ticket fix.

Tightening the wire wraps did help but it is not the root cause of the slipping toggle problem even after another simple adjustment of bending the toggle bar, the toggle ring still slips but remains caught on the lower coil of the bar when I wear it. So I decided to set the necklace aside for a while and it sat on display in my studio as I worked on other projects and this morning out of the blue I had a design vision and rushed to my art journal that I bought from my friend Alice on Etsy to sketch it out. What a beautiful sight, the look of the toggle changed completely I’m excited to get to work on it but first I’ll take a moment to stop and thank God for blessing me with this wonderful artistic and visually creative gift.

Tuesday, January 22, 2013

Building Relationships



My Pastor, Tim Thompson, always says that at our church we offer only Love and Truth according to the Gospel as it is written in the Bible. I believe this to be true because from the first moment I walked through the front door of the 60th Street Baptist Church sanctuary I felt a flood of welcoming warmth and comfort like that of family greeting me after a long separation. I’ll never forget that day last March because our music director Br. Steve Smith was the first to stretch out his hand to greet me and welcomed me into the flock of the small Missionary Baptist Church. Since that day I have faithfully attended Sunday and Wednesday evening services and have increasingly become involved in other church activities which I am thankful for as I am ever growing in faith, in hope and in the peace and joy I feel knowing that I will be lifted up to heaven when my last day comes. That warm fuzzy feeling I had and still have in fellowship with my church family is the same Love and Truth I desire to share with you, my potential Simply Katie’s and SK Wire Jewelry customers.
And what I want you to know is that you are much more than customers to me, you’re friends and family with viable concerns when contemplating making any investment purchase. And artisan handcrafted jewelry is as such, an investment to be passed down from generation to generation. My work, my jewelry designs are a labor of love built on a solid foundation of generations gifting love year round of the wares made with their loving hands and given with their loving hearts. My sincere hope as an artisan jewelry designer and small handcrafted business owner is that I meet and exceed your expectations in providing you with the best possible customer service, quality of handcrafted beaded gemstone and wire jewelry product, affordable artisan value, and making sure that your Simply Katie’s and SK Wire Jewelry purchase makes it to your door safely and on time.
My favorite designing experiences are the custom jewelry pieces I’ve been requested to create over the years and those jewelry pieces I create as personal gifts to those who have come to reside within my heart. Like the rose quartz and pearl bracelet and earrings I made for Miss Sylvia, the lavender pearl post earrings I made for Miss Jenny (who hasn’t yet taken them off) and the white pearl and signature spiral wire earrings I gave to Ms. Sandy.  Today I was wearing a beaded turquoise and copper necklace and earrings that I made last year and my friend Ms. Elva said to me “You always wear the most unusual jewelry, did you make that?” speaking of my necklace in particular to which I replied “Yes I did, it’s unique isn’t it?” She said to me “Honey, (she always calls me Honey) that’s what makes it so beautiful.” She melted my heart right then and there to give welcome notice to my design and offer such a wonderful compliment. 

My new friend Dawn shared a story with me when she saw me wearing a ring I recently created in fine silver using my new hot join soldering skills, and I’m very excited to have been asked to make a custom octagonal thumb ring for her. But wouldn’t you know I would have sold her the ring right of my finger but when she tried to put it on, sadly it was just a bit too small. That’s alright because it gives me the opportunity to practice and create another SK Wire Jewelry custom made Fine Silver Octagonal Thumb ring and a chance to gain word of mouth advertising from a happy customer when hers is ready.